|
|
Free Standing Carport
Safeguard your investment with the Free Standing Carport. Durable precut and pre-drilled parts and a vinyl coated steel frame make this carport durable and easy to asssemble. The carport is raised 7 feet 6 inches off the ground to allow spacious headroom for even the tallest of owners. This carport carries a 15-year limited warranty. It's available in 10' x 10' and 10' x 20' sizes in an elegant eggshell finish. Easily assembled in a day with a #2 Phillips screwdriver pliers work gloves and a stepladder. Note: 10' x 20' Free Standing Carport shown in picture.
|
Cardwell 20 x 12 Round Style Canopy Carport
Store vehicles and equipment or make a portable workshop with the All-Purpose Storage Shed. This durable shed measures 20L x 12W x 8H feet. It features a canopy made from UV-treated water-repellent 10-ounce polyester which is fire-rated for safety (CPAI-84 Section 5) and available in your choice of colors. Heat-welded seam construction ensures durability. The canopy is supported by a 12-legged six-ribbed galvanized all-steel frame and comes complete with six earth anchors with a 36-inch stainless steel tether and a drive rod to secure the unit at six strategic points. The frame is pre-drilled for easy setup with minimal hand tools. This shed also features double-zipper doors on both ends to allow for drive-through capability and good ventilation. Each door contains a pocket for a rigid pole plus grommets and bungee tie-backs for securing the doors when not in use.Additional FeaturesEasy bolt-together design - no drilling/cutting requiredWind brace support on both sidesProtective plastic tube end caps6 arches; 48-inch spacing between 1.625-inch frame membersDoor measures 10W x 6H feetThe round shape of this shed is great for promoting snow roll-off and for use in windy areas. Average setup time is 2 hours. Includes standard thread-plated hardware kit with retaining nuts/washers quick-assembly wrench heavy-duty poly rope included for main cover tie-down four bungee ties and six anchors.
|
The Dakota 20 x 12 House Style Canopy Carport
The Dakota is ideal for all types of uses from vehicle storage to an all-purpose work shed. This durable portable unit measures 20L x 12W x 8H feet. It features a canopy made from UV-treated water-repellent 10-ounce polyester which is fire-rated for safety (CPAI-84 Section 5) and available in your choice of colors. Heat-welded seam construction ensures durability through all types of weather.The Dakota is built to last with a 12-legged six-ribbed galvanized all-steel frame that's pre-drilled and pre-cut for easy setup. It comes complete with six earth anchors with a 36-inch stainless steel tether and a drive rod to secure the unit at six strategic points. This shed also features double-zipper doors on both ends to allow for drive-through capability and good ventilation. Each door contains a pocket for a rigid pole plus grommets and bungee tie-backs for securing the doors when not in use.Additional FeaturesEasy bolt-together design - no drilling/cutting requiredWind brace support on both sidesProtective plastic tube end caps6 arches; 48-inch spacing between 1.625-inch frame membersDoor measures 10W x 6H feetThe round shape of this shed is great for promoting snow roll-off and for use in windy areas. Average setup time is 2 hours. Includes standard thread-plated hardware kit with retaining nuts/washers quick-assembly wrench heavy-duty poly rope included for main cover tie-down four bungee ties and six anchors.
|
Dillon 24 x 12 Canopy Carport
Protect and store your vehicle or equipment with the green Extended Storage Shed. Durable portable and ideal for use in all areas this house-style shed is large enough to hold a full-size vehicle with room to spare. The peak height is 8 feet while on either side the height is approximately 6.6 feet. The pre-drilled frame is made from heavy-duty galvanized steel and it features 14 legs and seven arches made from 1.625-inch tubing. The canopy is made from fire-retardant (CPAI-84 Section 5) UV-resistant polyethylene with a woven backing in a neutral green color.Additional FeaturesEasy assembly - pre-drilled and pre-cutHeat-welded seams on fabric canopyDouble-zippered doors on both ends for drive-through capabilityPockets on each door for rigid pole insertionFull flap on cover for rain run-offWind brace support on both sidesProtective plastic tube end capsHeavy-duty grommets on cover and doorsThis shed is designed to assemble in 2.5 hours and it comes complete with a set of six earth anchors (each with 36-inch stainless steel tethers and a 36-inch drive rod) a plated hardware kit with retaining nuts and protective SS washers a quick-assembly wrench and a heavy-duty poly rope for tying down the main cover.
|
Fishtail 24 x 12 Extended Canopy Carport
The gray Extended Storage Shed is the perfect way to store vehicles tools equipment and more. Durable portable and designed for use almost anywhere this house-style shed is large enough to hold a full-size vehicle with room to spare. The peak height is 8 feet while on either side the height is approximately 6.6 feet. The pre-drilled frame is made from heavy-duty galvanized steel and it features 14 legs and seven arches made from 1.625-inch tubing. The canopy is made from fire-retardant (CPAI-84 Section 5) UV-resistant polyethylene with a woven backing in a neutral gray color.Additional FeaturesEasy assembly - pre-drilled and pre-cutHeat-welded seams on fabric canopyDouble-zippered doors on both ends for drive-through capabilityPockets on each door for rigid pole insertionFull flap on cover for rain run-offWind brace support on both sidesProtective plastic tube end capsHeavy-duty grommets on cover and doorsThis shed is designed to assemble in 2.5 hours and comes complete with a set of six earth anchors (each with 36-inch stainless steel tethers and a 36-inch drive rod) a plated hardware kit with retaining nuts and protective SS washers a quick-assembly wrench and a heavy-duty poly rope for tying down the main cover.
|
Mariner 24 x 14 Round Style Canopy Carport
The Mariner Storage Shed is the perfect way to store your motorboat or small vehicle. This durable shed features a canopy made from UV-resistant poly with fabric backing which is fire-retardant and reinforced with heat-welded seam construction. The frame is made from galvanized heavy-duty steel and has 14 legs (7 arches) each made from a 1.625-inch-diameter pole. Double-zipper doors on both ends of the unit allow for drive-through capability or good ventilation. Pockets on the doors allow for rigid poles to be inserted and heavy-duty grommets let you secure the doors up and out of the way when not in use.The Mariner frame comes pre-drilled and cut so minimal tools are required for setup (which typically takes about 2.5 hours). The unit also features a wind brace support on both sides and protective plastic tube end caps. Comes complete with a hardware kit quick-assembly wrench poly rope for main cover tie-down a door roll-up kit and eight permanent anchors.
|
Ledger 24 x 22 Double Canopy Carport
The 2-Car Workshop is great for car storage and repair. This durable portable shed features extra-high side wall clearance. The lowest point on either side of the wall measures 7 feet tall with the peak measuring a full 12 feet from the ground. This shed comes equipped with front and rear roll-up doors (each 20W x 6.5H feet) so you can open either panel to access the vehicle as well as drive straight through. The frame is made from heavy-duty galvanized steel and features seven arches across the top ending in a total of 14 legs. The poles are 2.375 inches in diameter and spaced 48 inches apart.Additional FeaturesMain cover & doors meet CPAI-84 Section 5 fire standardsDoors measure 12W x 8H feet14 anchors included each with U-bolts and 36-inch stainless steel tethersPre-drilled frame for easy assembly (approximately 3 hours)Heat-welded fabric seam constructionDoor pockets for rigid pole insertionHeavy-duty grommets for securing doors up during useWind brace support on all 4 cornersProtective plastic tube end capsIncludes plated hardware kit quick assembly wrench and poly rope for cover tie-down
|
Lonepine 30 x 14 Round Style Canopy Carport
The round shape of the Utility Building provides extra space along the sides of the enclosure with maximum height near the center ridge. This makes it ideal for vehicle storage and allows you plenty of room to work or store your tools as well. The pre-drilled frame of this unit is made from heavy-duty galvanized steel and features seven arches across the top. The arches end on either side in a total of 14 feet and the included 14 earth anchors help hold the unit firmly to the ground. Each anchor includes 36-inch stainless steel tethers and a 36-inch drive rod.The canopy of this unit is made from UV-protected fire-retardant polyethylene with a woven backing. It features heat-welded seam construction for optimum durability. The double-zipper doors on both ends allow for plenty of ventilation as well as drive-through capability and each door has a built-in pocket for a rigid pole at the base. The cover also features full flap protection for preventing rain run-off.Additional FeaturesEasy setup - requires 2 people and approximately 3 hoursWind brace support on both sidesIncludes 1 roll-up door kitProtective plastic tube end capsHardware kit assembly wrench and poly rope for cover tie-downHeavy-duty grommets on cover and doors
|
Melstone 28 x 12 Barn Style Canopy Carport
The Barn Style Shed provides the best in instant and portable protection for your trailer SUV work equipment and more. This durable shed provides excellent shelter and has a barn-style shape with peak height at the center. The pre-drilled frame is made of heavy-duty galvanized steel and is easy to assemble in approximately three hours. The main cover and doors are made from long-life UV-resistant fire-retardant polyethylene with a woven backing. All fabric features heat-welded seams for extreme durability.This unit has double-zipper doors on both sides for plenty of ventilation and easy drive-through capability. Each door contains a pocket for a rigid pole and grommets for tying the door up and out of the way when not in use.Additional FeaturesMain cover & doors meet CPAI-84 Section 5 fire standardsDoors measure 10W x 9.5H feet14 anchors included each with U-bolts and 36-inch drive rodsWind brace support on all 4 cornersProtective plastic tube end capsIncludes plated hardware kit quick-assembly wrench and roll-up door kit
|
Pinesdale 20 x 12 Barn Style Canopy Carport
The Barn Style Shed provides excellent shelter for vehicles or heavy equipment. This portable unit has a barn-style shape with peak height at the center. The pre-drilled frame is made of heavy-duty galvanized steel and is easy to assemble in approximately three hours. The main cover and doors are made from long-life UV-resistant fire-retardant polyethylene with a woven backing. All fabric features heat-welded seams for extreme durability.This unit has double-zipper doors on both sides for plenty of ventilation and easy drive-through capability. Each door contains a pocket for a rigid pole and grommets for tying the door up and out of the way when not in use.Additional FeaturesMain cover & doors meet CPAI-84 Section 5 fire standardsDoors measure 10W x 9.5H feet14 anchors included each with U-bolts and 36-inch drive rodsWind brace support on all 4 cornersProtective plastic tube end capsIncludes plated hardware kit quick-assembly wrench and roll-up door kit
|
|